|
SPAGNI |
1-2
Count liters to axial turbine model PI, battery operated digital command
9V
Operation with gravitates or on circuits with pomps. Electronic reader
for reading measures of flow. Sensor sinewaves digitalis.
The crystals liquid display points out: 1)Volume in liters disbursed
(possible total Counter not). 2) Course liters to the minute. The two
values are alternatively appraisable during the phase of filling. Possibility
of survey measures the braids English and US braids
Material: Display in material plastic, body stainless steel AISI 304-316
(1) or in nylon (2) - pads and turbine in stainless steel AISI 430 buckles
, support in graphite. Formulation impelled for setting of liquids with
different temperatures and stringiness. It works with battery 9V
3 Count liters mechanical volumetric with oscillating disk MODEL
CTE CTI
Operation with gravitaty or on circuits with pomps provided of by pass
partial Counter up to 99,9 liters (zero resetting with side handle grip)
Total counter up to 999.999 liters (non possible zero resetting) Material:
body noryl, grapevines in galvanized steel, fillets of link channel
by pass of setting and life regulation in brass. Formulation setting
of liquids with different temperatures and a half stringiness life regulation
4 Count liters to turbine electronic to digital
command model CL
Operation with gravitaty or on circuits with pomps. Display liters disbursed
h to liquid crystals to 5 figures 10mm. Pressure zero resetting on "Zero."
Material: Display in material plastic, body in PVC you depart in metal
in stainless steel AISI 304-316. Isolation class IP65
Measure of liquids without gas density water and/or wine. It works with
battery 1,5V alkaline (inclusive) Autonomy battery 2-4 years.
4.
bis - Magnetic Flowmeter model MAGN with digital command 12V CC A
Ideal to measure only liquid water based i.e.:water, wines, vinegars,
liqueurs (they don't work with alimentary oils, mineral and fuels).
Completely free light of passage. Absence of mechanical organs in movement.
Insensibility to the density and stringiness of the fluid in passage.
Low sensibility to the turbulences. High precision - reduced maintenance
Technical characteristics: instant visualization of the flow - visualization
overall volume in liters or US gallon. Zero resetting of the overall
disbursed. Running Pressure up to 20 bar (40 bar under request) Gone
out to impulses 12VDC Consumption max 300mA. Optioanals: above-the-line
feeder 230VaC >12VcCs Materials: you depart to contact with the fluid
polipropilene and steel inox. Flanges in nylon strengthened with fiber
glass.
5 Gun in Moplen for foods releases revolving link
Built
in moplen and steel stainless AISI 304, For Foods Revolving Link
It suits for the filling of containers with hole of filling of equal or
superior diameter to 24mm
Operation 1) Connect the pipe M to the container to be emptied
or to the pomp from I decant. 2) open the valve P up to when the liquid
reaches the desired level 3) Close P, leaving the lever. Is possible the
engine-block to open faucet, pressing the pulsating B.
TECHNICAL DATA : Pipe-holder 25mm. Measures A. cm 5, B cm15, H Hung cm
32 Gr 450. Piston faucet
OPTIONS: Pipe-holder diameter 30mm.
6
- GUN BARRIQUE DN20 (art.30945)
Completely built in Steel Stainless AISI 304
It suits for the filling of containers to smooth cylindrical hole of equal
or superior diameter to 34 mms. (in standard version D52 d50)
Operation 1) Connect the pipe M to the container to be emptied
or to the pomp from I decant, to close the sphere valve. 2) connect the
pipe S to an empty container, possibly place to an inferior or equal level
to the container C, 3) Insert the cone of kept C in the hole of filling,
to hold pressed in P so that cannot go out air between the cone and the
hole of filling. 4) open the valve M up to when he/she is seen to go out
the liquid of S. 5) Close M 6) slowly Extract her/it
gun from the hole of filling
Technical data adjustable: from satin to 90mm (others you level to application).
Free light of passage d 20mm.
Pipe of filling and pipe of unloading: Pipe-holder 25mm.
Measures: A cm15, B cm15, H Hung cm 32 Gr 1200
Sphere valve stainless dn20 for arrest and change container.
Regulation and block level planned with wrapper to life
OPTIONS Á. RICHIESTA: Cone of estate to measure.
7 - GUN TRONIC DN25 (art.33409)
It works with rechargeable accomulator without threads.
Faucet with electromagnetic probe for I unhook rapid to the pre-arranged
level.
Construction in Steel Stainless AISI 304
It suits for the filling of all containers with hole of equal or superior
diameter to 29 mms.
Operation 1) Connect the pipe M to the container to be emptied
or to the pomp from I decant, to close the piston faucet P (position unhooked
as in figure). 2) Plan the probe to the desired level. 3) Push the pulsating
red ON. 4) open the piston faucet (push in low) up to when the block of
the lever is had, it begins the filling. 5) the attainment of the planned
level there is the automatic unhook of the lever P with consequent arrest
of the flow of the liquid from M.
Technical data adjustable level : from satin to 200mm (others you level
to application).
Free light of passage d 25mm.
Pipe of filling: Pipe-holder 30mm.
Measures A cm8, B cm25, H Hung cm36 Gr 2000
Electric charger 220V: Included